阿根廷ENACOM官方发布关于低功率产品的新标准

Argentina ENACOM releases new test standard for Low Power Devices

阿根廷ENACOM官方发布关于低功率产品的新标准，是在决议ENACOM 6038/2016中提到的新标准ENACOM-Q2-60.14 V16.1

其中要点如下：

▪ 样品数量明显减少了，不再需要三个样品。如果产品能被设置成高/低信道，则一个辐射样品就足够了。否则，如果一个样品无法设置可调信道，那么至少需要两个样品（一个设置为低信道，另一个设置为高信道）。

▪ 目前低功率产品允许模块认证

▪ 低功率产品的相似性 - 如果产品的RF射频发射器和天线一样，则产品可声称为相似产品。

Argentina ENACOM releases new test standard for Low Power Devices. It was published in Official Bulletin the Resolution ENACOM 6038/2016 with a revised test standard for Low Power Devices “ENACOM-Q2-60.14 V16.1”.

Among others the main points to be considered are:

▪ The number of samples has been significantly reduced. Three samples are not required anymore. In contrast just one radiate sample would be enough if the sample can be configured for low/high channel. Otherwise, if channel selection cannot be set up on one sample, a maximum of two samples are required, one configured in low channel and the other configured in high channel.

▪ Modular approval for Low Power Devices is now allowed.

▪ Similarity for Low Power Devices is now allowed as long as the RF transmitter and antenna is exactly the same on the devices claimed to be similar.

具体问题请咨询NormalTCI诺莫检测

全国统一服务热线:400-6177-880

Email:service@normaltci.com